Oppo BDP-103 Bedienungsanleitung PDF herunterladen (Seite 59)

SETUP MENU OPTIONS

properly supports 1080p 24Hz, smoother motion can be achieved by enabling 1080p24 Output

for these discs.

x Auto (default) – Video encoded at a 24Hz frame rate will be output as 1080p 24Hz if the TV

informs the player that it can support the 1080p24 signal.

x On – Video encoded at a 24Hz frame rate will be output as 1080p 24Hz without regard to

whether the TV can support the 1080p24 signal or not. This is useful if the TV can actually

support 1080p24 but does not properly state its capability. Please note that if the TV cannot

support 1080p24, selecting this option will result

in no video.

x Off – Video encoded at a 24Hz frame rate will be converted to 60Hz (NTSC) or 50Hz (PAL)

9. DVD 24p Conversion: Allows you to enable 24Hz frame rate conversion for DVD. This option is

only available when 1080p24 Output is enabled (set to Auto or On). Many DVDs that originate

from theatrical movies are encoded with a technique called “3:2 telecine” in order to convert the

24 frames per second film to 60Hz video signal. The player can convert the 60Hz video signal

back to 24 frames p

er second film and output as 1080P/24Hz. Smoother motion may be

achieved by enabling this option, if both the TV and the DVD disc meet the conversion conditions.

The available options are:

x On – Converts DVD to 24Hz frame rate when possible. Remember that motion errors may

be observed if the DVD is not suitable for such conversion.

x Off (default) – Does not convert DVD to 24Hz frame rate.

10. HDMI Options: Configures video options that apply only to the HDMI output. This

item contains

a sub-menu with multiple configuration options. Please refer to the HDMI Options section on

page 59 of this manual for details of each option.

11. Display Options: Configures the options for displaying on-screen information.

x Subtitle Shift – Sets the display position for subtitles.

When the Subtitle Shift is set at 0 (default), subtitles are displayed at the original position as

specified on the disc. When it is set at a value between 1 and 5, subtitles are shifted up.

When it is set at a value between -1 and -5, subtitles

are shifted down.

This feature is helpful for customers using a 2.35:1 “Constant Image Height” video projection

system. Subtitles can be shifted to the active video area so they do not get cut off. You can

also press and hold the SUBTITLE button for 3 seconds to activate this selection.

x OSD Position – Allows you to set the display position for the on-screen display (OSD).

When the OSD Position is set to 0, the OSD is shown at the top and bottom of the video

screen. When it is set at a value between 1 and 5, the

OSD is shifted towards the centre of

the video screen.

Similar to the subtitle shift setting above, the OSD Position feature is helpful for customers

using a 2.35:1 “Constant Image Height” video projection system.

x OSD Mode – Allows you to select how long the on-screen display (OSD) information, such

as playback operation icons (PAUSE, STOP, SKIP, etc.), stays on the TV screen.

Normal – OSD information stays on the TV screen until the user cancels it.

Minimal – OSD information stays on the TV screen for a few secon

ds and then

disappears. The front panel display still maintains the selected display information.

Remaining –

OSD information stays on the TV screen until the user cancels it. By

default, displays remaining time instead of elapsed time.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Oppo BDP-103 Bedienungsanleitung Seite 59

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Blu-Ray-Player Oppo BDP-103